Product Introduction
Think of the Boiler Exhaust Draft Fan 180W as the quiet workhorse behind a medium-sized solid-fuel furnace. It pulls 650m³/h against 510Pa, enough suction for long horizontal flue runs and moderately restricted chimneys. The 180W two-pole motor runs at 2800r/min, accepts both 220V single-phase and 380V three-phase input, and sits inside a 320*280*320mm housing weighing 7.8kg. Because the shaft and impeller are dynamically balanced, noise stays low even at full speed, and the 202/201 bearings handle the thermal load of repeated start-stop cycles. Owners of greenhouses, workshops and farm boilers report that installing this fan improves fuel ignition and reduces creosote buildup noticeably. A standard carton contains one unit with the mounting hardware, and most stock sizes match existing boiler flanges. If a furnace struggles to breathe, fit the Boiler Exhaust Draft Fan 180W and restore proper draft in an afternoon. Get the Boiler Exhaust Draft Fan 180W now to protect your boiler and cut smoke complaints.
Product Parameter
| Specification | Details |
|---|---|
| Model | YNGL Boiler Induced Draft Fan (High-Temperature Resistant) |
| Power | 180W |
| Air Flow | 650m³/h |
| Total Pressure | 510pa |
| Speed | 2800r/min (2-pole) |
| Power Supply | Single-phase 220V 50Hz / Three-phase 380V 50Hz |
| Motor Frame | 56 |
| Running Capacitor | 6μF (single-phase) |
| Motor Bearings | Front 202, Rear 201 |
| Fan Weight | 7.8kg (single-phase & three-phase) |
| Overall Dimensions | 320*280*320mm |
| Packaging | Carton |
Hot Tags: boiler exhaust draft fan 180w, China boiler exhaust draft fan 180w manufacturers, suppliers, factory
