Product Introduction
If a boiler room tends to overheat or suffers backdraft, the 250W Boiler Draft Inducer Fan restores proper combustion airflow. This model moves 860m³/h at 580Pa and spins at 2800r/min on a two-pole motor, giving it the push needed for taller chimneys and higher-resistance heat exchangers. It runs from 220V single-phase or 380V three-phase supplies and uses a 6μF running capacitor in single-phase mode. The 63-frame motor is matched with front 202 and rear 201 bearings, and the complete fan weighs 9.5kg with a 390*320*370mm footprint, so it fits tight equipment rooms without special framing. Technicians like the removable inlet guard, which simplifies cleaning after a season of wood or coal firing. Many buyers choose the 250W Boiler Draft Inducer Fan as an upgrade when a smaller fan cannot hold draft during windy weather. Pair this 250W Boiler Draft Inducer Fan with a draft controller for automatic, worry-free operation, and place your order today for reliable heating through the coldest months.
Product Parameter
| Specification | Details |
|---|---|
| Model | YNGL Boiler Induced Draft Fan (High-Temperature Resistant) |
| Power | 250W |
| Air Flow | 860m³/h |
| Total Pressure | 580pa |
| Speed | 2800r/min (2-pole) |
| Power Supply | Single-phase 220V 50Hz / Three-phase 380V 50Hz |
| Motor Frame | 63 |
| Running Capacitor | 6μF (single-phase) |
| Motor Bearings | Front 202, Rear 201 |
| Fan Weight | 9.5kg (single-phase & three-phase) |
| Overall Dimensions | 390*320*370mm |
| Packaging | Carton |
Hot Tags: 250w boiler draft inducer fan, China 250w boiler draft inducer fan manufacturers, suppliers, factory
