Product Details
The Single Stage Vortex Blower 220V Portable combines genuine industrial pneumatic performance with the convenience of single-phase plug-and-play operation in a compact, transportable package weighing as little as 5.5 kilograms for entry-level models. Product photographs display the complete blower from multiple angles, emphasizing its manageable dimensions, integrated carry-friendly form factor, and standard 220V power connection that plugs directly into wall outlets without requiring special electrical installation. Internal structure cutaways reveal the same regenerative side-channel technology found in full-size industrial units - a precision impeller, sealed bearings, filtered inlet, and built-in silencer - all scaled into a portable chassis that maintains oil-free output quality. Material detail images document the aluminum alloy casting quality, the phosphated surface treatment, and the reinforced mounting base. The Single Stage Vortex Blower 220V Portable serves mobile service technicians, small workshop operators, field maintenance crews, and educational laboratory settings where equipment moves between locations. Application photographs show the blower in benchtop fume extraction, portable drying stations, temporary pond aeration setups, and mobile printing equipment. For users who need to take industrial pneumatic power wherever the job requires, the Single Stage Vortex Blower 220V Portable delivers performance without permanent installation.
Single-impeller vortex blower parameter table & overall installation dimensions explanation
- Single-impeller vortex blower performance parameter table
|
Product Name |
Single Stage Vortex Blower 220V Portable |
|
Model |
XGB-11000 |
|
Rated Voltage |
380 V |
|
Rated Current |
21 A |
|
Frequency |
50 Hz |
|
Max Wind Pressure |
75 kPa |
|
Max Flow |
1100 m³/h |
|
Max Suction Pressure |
55 kPa |
|
Power |
11 kW |
|
Speed |
2800 r/min |
|
Noise |
≤70 dB |
|
Net Weight (N.W) |
120 KG |
|
Gross Weight (G.W) |
135 KG |
|
Packing Volume |
73.5x58.2x72.5 CM |
- Single-impeller vortex blower installation dimensions explanation
Introduction to application scenarios
The Single Stage Vortex Blower 220V Portable packs genuine industrial pneumatic capability into a compact, portable package weighing as little as 5.5 kilograms - ready to deploy wherever a standard 220V outlet is available. Mobile service technicians and field maintenance crews carry these blowers between job sites for on-demand drying, fume extraction, and pneumatic tool power - eliminating the need to transport heavy, permanently-installed equipment. Educational institutions and training centers use the Single Stage Vortex Blower 220V Portable in laboratory setups that move between classrooms, providing hands-on fluid dynamics and vacuum technology demonstrations without permanent infrastructure. Temporary event installations - exhibition booths, outdoor catering, mobile workshops - deploy these blowers for ventilation, air display systems, and cooling applications that need to be set up and packed down within hours. The Single Stage Vortex Blower 220V Portable also serves portable pond aeration, emergency spill response fume extraction, field construction site ventilation, and pop-up manufacturing kiosks - bridging the gap between fixed industrial installations and mobile operational requirements.
Customised processing workflow
Customizing the Single Stage Vortex Blower 220V Portable for your brand follows a straightforward six-point workflow managed by our dedicated OEM project team from start to finish.
1 - Inquiry & Scoping: Send us your target specifications and branding requirements for an initial feasibility review completed within one business day.
2 - Proposal & Pricing: We return a comprehensive offer with technical specifications, unit pricing, tooling costs if applicable, and estimated production timeline.
3 - Prototype & Approval: A fully functional sample is produced using your specified configuration for performance validation and aesthetic sign-off.
4 - Order & Deposit: Bulk production commences upon receipt of confirmed purchase order and agreed deposit payment.
5 - Build & Inspect: Manufacturing runs with in-process QC; we welcome third-party inspection at any production stage.
6 - Pack & Ship: Units are packed to international standards and shipped via your preferred logistics method with complete documentation.
Packaging and transportation
Factory Introduction
FAQ
Q: What is the maximum operating temperature?
A: Standard XGB blowers operate reliably in ambient temperatures from -15°C to 40°C with air temperature at the inlet not exceeding 40°C. The motor is rated for Class F insulation (155°C), and bearings are specified for 180°C. For high-temperature applications, please contact our engineering team for custom configurations.
Q: Does the motor have overload protection?
A: The blower motor itself does not include built-in thermal protection. We strongly recommend installing an appropriately rated motor protection circuit breaker or thermal overload relay in your electrical panel. This protects the motor from phase loss, overcurrent, and thermal overload conditions according to local electrical codes.
Q: What regular maintenance does the blower require?
A: The XGB blower is virtually maintenance-free. The oil-free design eliminates lubrication, and sealed bearings require no greasing. Recommended maintenance: clean or replace the inlet filter every 3-6 months, periodically inspect the silencer foam condition, check mounting bolt tightness annually, and verify electrical connections. No other routine service is required.
Q: What is the minimum order quantity and typical lead time?
A: Sample orders of single units are welcome for evaluation. Standard models ship within 3-7 business days from warehouse stock. Custom OEM orders with special voltage, color, or branding typically require 15-25 business days depending on volume and complexity. Contact our sales team for current availability and precise delivery timelines.
Q: What payment terms do you accept?
A: For sample and small orders, we accept T/T (wire transfer), Western Union, and major trade assurance platforms. For bulk OEM orders, standard terms are 30% deposit with order, 70% balance before shipment. Letter of credit (L/C) is available for qualified buyers. Contact our sales team to discuss terms that work for your procurement requirements.
Q: What shipping methods do you offer?
A: We ship globally via sea freight (most economical for bulk orders, 15-35 days), air freight (faster, 5-10 days), and international express courier (DHL/FedEx/UPS, 3-7 days for samples). We work with your nominated forwarder or can recommend reliable logistics partners. All shipments include comprehensive insurance coverage.
Q: How do I get technical support after purchase?
A: Our after-sales support team is available via email, WhatsApp, and video call during business hours (GMT+8). We provide installation guidance, troubleshooting assistance, and maintenance recommendations. For complex issues, we can arrange live video inspection of your installation. Spare parts and replacement units ship within 48 hours of confirmed warranty claims.
Q: Can I return a blower if it doesn't meet my requirements?
A: We stand behind our product quality. If a standard model does not meet your application requirements and the unit is in original condition, returns are accepted within 30 days subject to a restocking fee. We strongly recommend sample evaluation before bulk ordering to confirm suitability. Custom OEM units are non-returnable as they are built to your unique specifications.
Q: What is a regenerative blower and how does it differ from a centrifugal fan?
A: A regenerative blower, also called a side channel blower or ring blower, uses a non-contact impeller rotating inside a specially shaped housing to regenerate air pressure through multiple compression cycles. Unlike centrifugal fans that accelerate air radially, regenerative blowers achieve substantially higher pressure in a compact single-stage design while maintaining 100% oil-free airflow - ideal for contamination-sensitive applications.
Q: Can this blower run 24/7 continuously?
A: Yes, the XGB regenerative blower is designed for continuous-duty operation. The aluminum alloy housing with integrated cooling fins, precision-balanced impeller, and sealed bearings ensure reliable around-the-clock performance. We recommend selecting a model rated at least 20% above your actual pressure and flow requirements for extended service life in continuous applications.
Hot Tags: single stage vortex blower 220v portable, China single stage vortex blower 220v portable manufacturers, suppliers, factory
