Product Details
The 220V High Pressure Single Stage Fan brings genuine industrial compression capability to single-phase electrical environments. Product photographs display the complete aluminum alloy blower with its finned motor barrel, compact junction box configured for standard 220-volt household and light-industrial wiring, and threaded air duct connectors mounted on the lower chassis. Internal structure diagrams reveal the single impeller operating on the regenerative principle, where repeated compression cycles inside the side-channel housing generate pressure substantially higher than conventional centrifugal fans of equivalent size. Material quality images document the high-purity copper motor winding visible through the housing, precision C&U bearings with full-seal rubber protection rated to 180 degrees Celsius, and the phosphated corrosion-resistant surface finish. The 220V High Pressure Single Stage Fan delivers oil-free airflow across diverse applications including CNC router vacuum work-holding, paper cutter air cushion systems, textile steam extraction, and food packaging line suction - all from a standard wall outlet. Factory photographs confirm organized production lines with in-process quality checks at each assembly stage. For small workshops, laboratories, and mobile service operations where three-phase power is unavailable yet genuine industrial pressure performance is required, the 220V High Pressure Single Stage Fan bridges the gap between convenience and capability.
Single-impeller vortex blower parameter table & overall installation dimensions explanation
- Single-impeller vortex blower performance parameter table
|
Product Name |
220V High Pressure Single Stage Fan |
|
Model |
XGB-550 |
|
Rated Voltage |
220 V |
|
Rated Current |
3.5 A |
|
Frequency |
50 Hz |
|
Max Wind Pressure |
20 kPa |
|
Max Flow |
110 m³/h |
|
Max Suction Pressure |
16 kPa |
|
Power |
0.55 kW |
|
Speed |
2800 r/min |
|
Noise |
≤60 dB |
|
Net Weight (N.W) |
12.8 KG |
|
Gross Weight (G.W) |
13.8 KG |
|
Packing Volume |
32.7x30.2x30.7 CM |
- Single-impeller vortex blower installation dimensions explanation
Introduction to application scenarios
The 220V High Pressure Single Stage Fan delivers genuine industrial pressure performance from a standard 220V wall outlet, eliminating the need for three-phase electrical installation - a critical advantage for small workshops, mobile operations, and retrofit projects. CNC router shops and woodworking studios deploy these blowers for vacuum table work-holding, securing panels and workpieces during high-speed machining operations from single-phase power. Print shops use the 220V High Pressure Single Stage Fan for paper cutter air cushion systems and printing press substrate hold-down, where the high discharge pressure ensures reliable media control. Automotive detailing and car wash operations integrate these blowers into drying stations, where the powerful air stream removes water from body panels and crevices in seconds. The 220V High Pressure Single Stage Fan also powers textile steam extraction, laboratory fume removal, small-scale pneumatic conveying, and dental vacuum systems - bringing industrial-grade pressure to applications previously limited by single-phase electrical availability.
Customised processing workflow
Yijia's OEM/ODM program for the 220V High Pressure Single Stage Fan is structured around six clear milestones that keep your project on track from initial contact to delivered product.
Milestone 1 - Discovery Call: Discuss your application, volume projections, and customization needs directly with our product specialists.
Milestone 2 - Quote Delivery: A detailed commercial offer arrives covering all agreed modifications with transparent pricing and lead time estimates.
Milestone 3 - First Article Inspection: Examine and test the pre-production sample against your quality checklist before authorizing full production.
Milestone 4 - Purchase Order Acceptance: Formal order confirmation with production slot reservation and deposit payment processing.
Milestone 5 - Production Monitoring: Receive progress updates and in-process photos as your order moves through the manufacturing line.
Milestone 6 - Shipment Notification: Tracking details, packing list, and export documents are shared as your consignment departs the factory.
Packaging and transportation
Factory Introduction
FAQ
Q: Does the motor have overload protection?
A: The blower motor itself does not include built-in thermal protection. We strongly recommend installing an appropriately rated motor protection circuit breaker or thermal overload relay in your electrical panel. This protects the motor from phase loss, overcurrent, and thermal overload conditions according to local electrical codes.
Q: What regular maintenance does the blower require?
A: The XGB blower is virtually maintenance-free. The oil-free design eliminates lubrication, and sealed bearings require no greasing. Recommended maintenance: clean or replace the inlet filter every 3-6 months, periodically inspect the silencer foam condition, check mounting bolt tightness annually, and verify electrical connections. No other routine service is required.
Q: What should I do if the blower overheats?
A: First, check that the inlet filter is clean and unobstructed. Verify the operating pressure and flow are within the rated specifications. Ensure adequate clearance around the unit for cooling airflow (minimum 100mm on all sides). Check electrical supply voltage matches the motor nameplate. If overheating persists, reduce load or contact our technical support team for diagnostics.
Q: What payment terms do you accept?
A: For sample and small orders, we accept T/T (wire transfer), Western Union, and major trade assurance platforms. For bulk OEM orders, standard terms are 30% deposit with order, 70% balance before shipment. Letter of credit (L/C) is available for qualified buyers. Contact our sales team to discuss terms that work for your procurement requirements.
Q: What shipping methods do you offer?
A: We ship globally via sea freight (most economical for bulk orders, 15-35 days), air freight (faster, 5-10 days), and international express courier (DHL/FedEx/UPS, 3-7 days for samples). We work with your nominated forwarder or can recommend reliable logistics partners. All shipments include comprehensive insurance coverage.
Q: What warranty coverage is provided?
A: All XGB regenerative blowers carry a 12-month manufacturer warranty from the date of shipment, covering defects in materials and workmanship under normal operating conditions. The warranty covers parts replacement or repair. Extended warranty options up to 24 months are available for OEM partners and volume buyers. Warranty claims are processed within 5 business days of diagnosis confirmation.
Q: Can I return a blower if it doesn't meet my requirements?
A: We stand behind our product quality. If a standard model does not meet your application requirements and the unit is in original condition, returns are accepted within 30 days subject to a restocking fee. We strongly recommend sample evaluation before bulk ordering to confirm suitability. Custom OEM units are non-returnable as they are built to your unique specifications.
Q: What is a regenerative blower and how does it differ from a centrifugal fan?
A: A regenerative blower, also called a side channel blower or ring blower, uses a non-contact impeller rotating inside a specially shaped housing to regenerate air pressure through multiple compression cycles. Unlike centrifugal fans that accelerate air radially, regenerative blowers achieve substantially higher pressure in a compact single-stage design while maintaining 100% oil-free airflow - ideal for contamination-sensitive applications.
Q: What makes the XGB series different from competitors?
A: The XGB series features aviation-grade aluminum alloy housing, 100% pure copper motor windings on premium models, precision C&U bearings rated to 180°C, integrated silencer ducts with sound-absorbing sponge, filtered air inlets, and individual QC certification before shipment. Each unit passes factory testing with documented performance verification.
Q: Can it be used for both vacuum and pressure simultaneously?
A: The XGB blower functions as both a vacuum pump and pressure blower, but not simultaneously from a single unit. The inlet port generates vacuum while the outlet delivers compressed air. You can connect your vacuum application to the inlet and pressure application to the outlet independently. For simultaneous operation, we recommend using two separate blowers.
Hot Tags: 220v high pressure single stage fan, China 220v high pressure single stage fan manufacturers, suppliers, factory
