Product Introduction
Small dust arms, spray booths and bench filters gain real pickup from the DF-1.6-I 250W Centrifugal Blower Fan, which produces 504 m3/h of airflow at a firm 860 pa of total pressure while turning 2800 r/min. Motor frame 63 carries front and rear bearings 201 and 202, so the rotor stays centered whether the supply is single-phase 220V 50Hz or three-phase 380V 50Hz, and the single-phase version adds a 6uF running capacitor. Weighing 6 kg in either voltage form, the fan measures 490 x 355 x 290 overall when two units are packed in a single carton. The DF-1.6-I 250W Centrifugal Blower Fan gives noticeably stronger pressure than the smaller frame-56 models in the DF range, which makes it useful for pulling air through pleated filters and narrow flexible hoses. Two blowers arrive in one carton, and the compact casing tucks easily onto workbench legs or filter carts. For moderate-volume fume and dust control within a 250W power budget, keep the DF-1.6-I 250W Centrifugal Blower Fan at the top of your shortlist.
Product Parameter
| Specification | Details |
|---|---|
| Model | DF-1.6-I |
| Power | 250W |
| Air Flow | 504m³/h |
| Total Pressure | 860pa |
| Speed | 2800r/min (2-pole) |
| Power Supply | Single-phase 220V 50Hz / Three-phase 380V 50Hz |
| Motor Frame | 63 |
| Running Capacitor | 6μF (single-phase) |
| Motor Bearings | Front 201, Rear 202 |
| Fan Weight | 6kg (single-phase), 6kg (three-phase) |
| Overall Dimensions | 490*355*290 (2 units) |
| Packaging | Carton (2 units per case) |
Hot Tags: df-1.6-i 250w centrifugal blower fan, China df-1.6-i 250w centrifugal blower fan manufacturers, suppliers, factory
